SMART POWER SPS-600 Battery Backup Power Supply with 100Ah Gel Battery & Solar Connector, 600W

Sold out
R 8,580.00
R 8,235.00

The Smart Power SPS-600 Battery Backup Power Supply easily connects to a standard wall socket and is designed to instantly supply your home or workplace with electricity when your power goes off.

  • Keep your TV, chargers, routers & other devices plugged in with no interruption
  • Pure Sine Wave Inverter: perfect for the more sensitive appliances such as LED TV and computer screens, fridges
  • 1 x deep cycle 100Ah gel battery ensures the system lasts up to 2.5 hours at 500W average load
  • Includes built-in solar charge controller
  • Modular design with LCD function display
  • Automatic voltage regulator & switchover
  • Intelligent CPU control, overload protection & fan cooling

The SPS-600 can typically run a modern flat screen LCD TV (100W), a laptop (50W), a DSTV decoder (50W) and a low energy lamp (20W) for 5 hours or more. All devices plugged into the SPS-600 are protected from damaging surges and spikes. The gel battery is installed inside of the cabinet and the SPS-600 will be delivered ready to switch on and use.

In addition, the SPS-600 has a built-in solar controller for OPTIONAL solar connection. A solar panel is not included. A solar panel is not needed to run the SPS but it can be added at any time to charge the batteries or provide power to any device plugged in. The solar function can operate alongside or completely free of mains power. If the power ever fails for more than a few hours, the SPS, connected to a solar panel, could supply vital free electricity, day after day.

THE SPS-600 can either be:

  • Plugged into a standard wall socket
  • Connected to a solar panel
  • Plugged into a wall socket & solar panel simultaneously
  • OR run on battery power only

Product specifications:

  • Model: SPS-600u with battery
  • Output power: 600W
  • Peak surge: 1200W
  • Storage battery: 1x 100Ah deep cycle gel battery (included)
  • Locking battery cabinet
  • Mobile (wheels)
  • Simple operation & fully automatic
  • No exposed wiring
  • Low battery/overload warning
  • 2 x peak surge capacity
  • All-in-one cabinet
  • Charging mode: 10A/20A battery charger settings
  • LCD display: Voltage input/output, Battery status, Overload

AC Mode:

  • Input voltage: 145-275VAC
  • Input frequency: 45–65Hz
  • Output voltage: 220VAC±10%
  • Short Circuit: Breaker

Inverter Mode:

  • Output voltage: 220VAC±10%
  • Output frequency: 50±1% Hz (auto-detection)
  • Output waveform: Pure sine wave


  • Transfer time: typical 2-6ms
  • Overload: 110% shut down within 60 seconds & 120% shut down within 5 seconds
  • Short circuit: ≥20ms automatic shut down
  • Protection: Discharge, overcharge & overload protection


  • Dimensions: 45 x 45 x 25cm
  • Operating environment: 0°C - 40°C. Humidity 20% - 90% non-condensing
  • Noise level: Less than 40db (1m)
  • Weight (including battery): 49Kg
  • Weight (excluding battery): 20Kg 
  • Warranty: 1 year

You recently viewed

Clear recently viewed


Have a Question?

Be the first to ask a question about this.

Ask a Question