HEAT TECH Thermosiphon Direct Flat Plate Solar Geyser Kit (200L, 2.4m²)

Sold out
R 8,655.00

The HEAT TECH Thermosiphon Direct Flat Plate Solar Geyser Kit (200L, 2.4m²) includes the main components to install your own close-coupled thermosiphon solar geyser system.

  • Direct solar water heater system for frost-free locations with a 200l capacity geyser & 2.4m² flat plate solar collector
  • Use as a close-coupled system: simple & reliable water heating solution with no need for circulation pump
  • B class rated energy efficiency for low energy loss & an efficient electric water heater with an automatic thermostat that ensures water is always hot
  • Set the desired hot water temperature within the range of 38 - 65°C using the automatic thermostatic 3-way mixing valve
  • Solar collector panel provides maximum absorption efficiency, can withstand extreme climate conditions while ensuring reliable & effective operation
  • Enjoy peace of mind with a 5-year warranty

The Heat Tech solar water heater direct system is suitable for frost-free locations where the ambient temperature is never below 5°C and the quality of the water is good (<600ppm total dissolved solids/minerals). The geyser must be located on your roof just above the collector. This system allows water to be circulated by gravity through the solar collector. Installation requires standard plumbing components (air release valve, 2 vacuum breakers, non-return valve, copper piping, elbows, T-pieces, solder) and a geyser cradle custom made for your roof.

ITS is the leading solar water heating and heat pump supplier in South Africa. ITS was founded in 2006 and has grown into an international manufacturer and supplier of solar thermal and heat pumps.

Click here to view all ITS Solar products available in South Africa

Technical drawing:

Geyser specifications:

  • Nominal capacity: 200l
  • Maximum working pressure: 600kPa
  • Heating element: Spiral
  • Power: 4kW
  • Voltage: 230V
  • IPX rating: IPX4
  • Maximum working temperature: 70°C
  • Insulation thickness: 48mm
  • Insulation type: Polyurethane
  • Standing heat loss: 1.5kWh/24h
  • Safety valve: 600kPa
  • Inlet/outlet connection: ¾in female
  • Connection distance: 1043mm
  • Anode type: Magnesium
  • Anode dimensions: 20 x 1000
  • Dimensions [Ø x d x h]: 570 x 1369 x 578mm
  • Weight: 51kg

Solar collector specifications:

  • Model: ITS-FLP2.4
  • Gross area: 2.4m²
  • Aperture area: 2.25m²
  • Cover material: Frosted tempered glass
  • Cover thickness: 3mm
  • Guarantee: 5 years
  • Dimensions [h x w x d]: 2000 x 1200 x 80mm
  • Weight: 38kg

Mixing valve specifications:

  • Maximum operating pressure: 10bar (1mPa)
  • Maximum operating temperature: 90°C
  • Adjustable temperature range: 38 - 65°C
  • Valve body material: DZR-brass (corrosion resistant)

      You recently viewed

      Clear recently viewed


      Have a Question?

      Be the first to ask a question about this.

      Ask a Question